Spark Plug Wrench – ’09-UP KTM LC8 / ’08-UP KTM LC4 , 14MM Hex

Description

Having a spark plug socket on your bike during trips can save you from a long walk if you need to pull that plug to get water out or just see what’s going on. Why KTM does not supply one anymore is beyond us. You can purchase one from them but it’s $70! Why so expensive….who knows? I ordered one in hopes it would be the 3 piece set they use to supply the pre-06 bikes, but no luck. It’s a 1/2″ drive socket that is not practical for trail use. Who wants to carry along a huge 1/2″ ratchet wrench?

I have cleaned up the design so that you can utilize your CJ Designs oil change tool kit and this spark plug wrench on the trail, yet still use a torque wrench to precisely install them at your service interval in the shop. These 2 kits pack down smaller than any other tool combo I’ve found. That’s why I use it.

My socket is properly sized to stay straight in the plug bore and not cause any binding or stuck situations. The last thing you want is for your Socket to get locked in the bore when changing plugs like some home made units have. We’ve seen it. Not good.

If you’re saving money by doing service yourself, get the tool that helps you do it easier.

Works on:
KTM Models using spark plugs with 14MM Hex

May fit more bikes than listed.

KTM 790/890, 990

Please cross reference your sparkplug and check its specs

If you your KTM requires spark plugs with 16MM Hex see HERE

CJD-SPW 09UP

Description
CJD 09+ Spark plug wrench 14MM Hex