Sign Up For Deals!
CJ Designs KTM LC8 Complete Water Pump Kits (Short/Long) – with Cover Gasket
Short Shaft = USA LC8 ADV ’03-’08, USA LC8 950 SE ’07-’09, USA LC8 990 Super Duke ’07-’08
Long Shaft = USA LC8 990 ’09-13
– CJ Designs “Super Shaft” water pump kits use the CJD designed, hardened and coated shafts and replace the soft, failure prone oem shaft.
– CJD offers a 3 year/36,000 mile limited warranty on the shaft to the original purchaser. If it fails, CJD will replace the shaft to the original purchaser for FREE. Will anyone else do that??
– These shafts have been tested in CJ’s bike for over 60,000 miles w/o failure and there are hundreds in use around the world.
Note: The large side cover gasket is included in this Complete kit but are not shown in the picture.
Shafts are laser marked so you know you have the CJD shaft and not an imposter.
You may also need a new Graphite Collector gasket depending on how long it’s been. Over time these get cooked and when the right side header is removed, often they are not able to be reused. We have these listed above and in stock to make sure you have all the needed parts.
You’ll need a NEW oil filter when you do this rebuild- We have them in stock and listed here.
Do you want CJ Designs to install your new kit for you?
We can do that. Please send in your engine case, prepaid, CLEANED and KEEP IMPELLOR INSTALLED ( send everything but the outer cover ), and we will send back a ready to install case just as we would install in our bikes.
LABOR COST $89 (plus parts). Please email before you send your case in. Look at our events page for dates when the shop is closed and no work can be offered. Turn around time is 1-2 days when I am in the shop. Your case will be sent back 2-3 day USPS unless faster service is requested.
Have you destroyed your case while trying to install this kit?
Don’t worry, you’re not the first. CJ Designs now STOCKS NEW cases and can get you going again FAST (Case and Parts Installed). Once and awhile we also have USED cases in stock. Email to check stock.
To register for the warranty you need to send a digital picture of your odometer and vin# from your bike to email@example.com and put “water pump warranty” in the subject line. It will be kept on file to verify. You should also keep this info with your bike records.
Install to KTM directions. Warranty will not cover OEM KTM parts or improperly installed parts. Seals should always be lubed when installed over the new shaft. This is limited to 2 shafts to original customer during the warranty period. If CJD shafts are not available, a prorated refund or OEM shaft will be offered. All part claims must be sent in for CJ Designs to examine first. Upon request, New shaft will be shipped first with payment, refund will be sent if part failure is determined to be a CJ Designs issue. These shafts are much harder than OEM, handle with care.
USA models (If you do not see your model or year listed below please check to see if the part numbers below match your impellor.)
Short Shaft = LC8 ADV ’03-’08, LC8 950 SE ’07-’09, LC8 990 Super Duke ’07-’08
Long Shaft = LC8 990 ’09-13
NOT SURE OF YOUR YEAR- Please check your micro fiche for the WATER PUMP WHEEL listed for your bike. If your 03-08′ bike has been worked on by a previous owner, please make sure they have not upgraded to the newer LONG shaft housing before ordering Short shaft kits. It is best to inspect the Impellor and match KTM part number below.
SHORT kit uses PN 60035055100
LONG kit uses PN 61235055000
3YR/36,000 MILE Limited Warranty on the shaft to original purchaser.
The complete kits come with a shaft seal, but you can add a replacement if you want a spare or extra in case you mess up the installation.
6003000114423 – ktm case cover
ss ver 2 (2.8.17)
ss ver 3 (1.20.19)