Axle Adjuster Blocks

Description

CJ DESIGNS AXLE ADJUSTER BLOCKS  –  Orange and Black are back in stock – This will be my last batch.  Once they are gone, they are gone. – 6/17/23

KTM LC8 950SE-950/990 ADV/SM/SMR – 690 Enduro/ Duke – 1090/1190/1290 ADV – Husky 701 Enduro – KTM 790/890

* Billet CNC machined blocks with engraved fine adjuster marks *

MADE IN THE USA!

Sold as a pair (left and right side) – Orange, or Black sets

Why do you need these? Look at the second picture that shows the stock adjuster block alongside the CJ Designs block. The stock ones can crack and leave you with no way to get your proper chain tension! Eliminate a possible problem before you’re stranded hundreds or even thousands of miles from home. NOT Good. Cracked OEM on left, Billet CJ Designs on right.

TO INSTALL: Heat and remove threaded on OEM cast Axle Block. The heat releases the Lock Tite. The block should come off with a twist. IT WILL BE HOT! Hold axle tube in vise with soft jaws. Let axle cool. Thread on CJD Billet Axle Block with red locktite. Opposite spacer replaces OEM cast one. If you would like these installed for you. Please send your axle in and I can install them. Install option is listed above.

Not sure if this fits your bike? Check your bikes micro fiche to match up your spacer block with KTM # 6001008400

CJD-RABS-BK Black

CJD-RABS-O Orange

CJD-RABS-BL Blue – NLA

60010086000 COLLAR NUT WH. SPINDLE REAR 03 (capped end)

61010086000 Collar Nut  (Open End)